Profidrum, Shower, Carbon, Softener, Reverse Osmosis Filtration Upgrade in Ha...

[vincesamara]

I have just completed major installation in Hanford. The appx 20k gal total volume, the pond was built with settlement chamber and japanese mat chamber as inline filtration. These chambers are huge (under the boards) They measure appx 8ft deep, 10 ft wide and more than 20ft long, they hold almost as much water as the pond itself. The owner was never happy with the result. Water was always murky during heavy feeding season and the chambers couldnt provide. With the intention to aid clarity, there were add-ons of bead filters, sand/gravel, home made showers, patches work here and there. All these had to go.

http://uploads.tapatalk-cdn.com/20160201/88d8ff4ec44081ef039cfab0f5843acf.jpg

http://uploads.tapatalk-cdn.com/20160201/da3d380f04add1eb1e11486ff9a150c3.jpg

http://uploads.tapatalk-cdn.com/20160201/35e2be40c739fe44e31e4c02bbad60e2.jpg

http://uploads.tapatalk-cdn.com/20160201/a03fd4f80e4d9d7101cb4bfbf669e493.jpg

https://vimeo.com/153791921

https://vimeo.com/153790547

[GloriaL]

And...and....

[vincesamara]

So after two months of planning, Alvin (owner) gave me the green light. Nice thing about profidrum, it can be pump fed. We turned the gazebo into the filter area.

We removed the gravel and beads filter. These local guys came to rescue. There is no way I can do it by myself!

http://uploads.tapatalk-cdn.com/20160201/441514166fabf3488e89653d8742a24b.jpg

The RDF stand was built on site. Simple table using 4x4 and 2x6 redwood.

http://uploads.tapatalk-cdn.com/20160201/d6b35de11b4b42fb50eef05a30bb2203.jpg

http://uploads.tapatalk-cdn.com/20160201/9cce4d05851bda93a82ea3388098d28c.jpg

Two Flowfriend pumps feeding the 65/60 profidrum. Each is rated 16k galons per hour at their highest rpm without head pressure.

http://uploads.tapatalk-cdn.com/20160201/bc10ecf31527e56f0dee925592d51ef3.jpg

Plumbing intake directed from settlement chamber down the bottom, inserted from the 3 bottom drain line.

http://uploads.tapatalk-cdn.com/20160201/f58595a5e7fa92835d2c13b687c9e792.jpg

http://uploads.tapatalk-cdn.com/20160201/61e9f591822db733dab2bbfe785ad7af.jpg

We decided to keep the old shower and adding another. The stainless steel bakki is from Norm at BW Koi. As matter of facts, everything you see here is coming from him. Lol. Except the carbon softener and RO filter

http://uploads.tapatalk-cdn.com/20160201/aa3af8bd86c39aba7f1b4587248bfd74.jpg

http://uploads.tapatalk-cdn.com/20160201/0b28380c082c47af9e34779ebb950ffc.jpg

http://uploads.tapatalk-cdn.com/20160201/e8bcb4da6eea04c97cd0587e1721236c.jpg

And this is what I removed

http://uploads.tapatalk-cdn.com/20160201/7b2ae50f0a995435fe652880b8eaa6b9.jpg

[vincesamara]

For those of you who familiar with profi. In pump fed mode, the sensors and fail switch are located in the dirty side.

http://uploads.tapatalk-cdn.com/20160201/83ebb7f21b732ad7322c4bfff982ebec.jpg

The rdf is elevated to level with the shower

http://uploads.tapatalk-cdn.com/20160201/9d046b98e5e2f93ed7c47a174ba02757.jpg

Alvin tested the city water tds reading 350ppm and his pond is at 400ppm currently, feeding hasnt take place in couple of weeks and I guess during past summer feeding the pond tds mustve been in the upper 700ppm. Our goal is to bring it down to under 100ppm

Direct trickling unfiltered city water had to stop. So 2.5cf carbon filter and 80k softener are installed along with commercial 800 gpd Reverse Osmosis. He is serious about growing GC, no more messing around.

http://uploads.tapatalk-cdn.com/20160201/a92edefe2192ac0d1fcaa6cab013b780.jpg

[GiaKoi]

is that pump fed rdf? I didn't know it is exist.

[vincesamara]

at this moment, profidrum is the only rdf that can be pump fed, as far as I know. I was told that blue eco is working on electronic sensors for pump fed, but I havent got answers are yet.

[icu2]

Great job Vince!
The new shower looks fantastic... I'm wondering how long it will be before the diy one gets replaced with
another stainless steel one. :D:

[abuchi123]

Pump fed RDF before shower. Very interesting. Did you use two 3" pipes for both in and out?


Thanks for posting.

[vincesamara]

Thanks guys!

Abuchi, 3" for the intake and 4" for the out to the showers.

[vipertom1970]

First class pond equipment and very nice install !!

[vincesamara]

Thanks Tom

[bobbd]

Nice work

[GKoi]

Very nice. Shower looks very cool


Sent from my iPhone using Tapatalk

[vincesamara]

Just got a great review from the owner. This is the best compliment a client has given me.

http://uploads.tapatalk-cdn.com/20160320/59e8105e90393227402a4324947714ce.jpg

[Hugomizz]

Vince where is the RO unit on this build

[vincesamara]

Right there on center last picture. the white looking box.

[Hugomizz]

Right there on center last picture. the white looking box.

Cool so how do you control the KH

[vincesamara]

By adding filtered - non- RO water

[coolwon]

For those of you who familiar with profi. In pump fed mode, the sensors and fail switch are located in the dirty side.

http://uploads.tapatalk-cdn.com/20160201/83ebb7f21b732ad7322c4bfff982ebec.jpg

The rdf is elevated to level with the shower

http://uploads.tapatalk-cdn.com/20160201/9d046b98e5e2f93ed7c47a174ba02757.jpg

Alvin tested the city water tds reading 350ppm and his pond is at 400ppm currently, feeding hasnt take place in couple of weeks and I guess during past summer feeding the pond tds mustve been in the upper 700ppm. Our goal is to bring it down to under 100ppm

Direct trickling unfiltered city water had to stop. So 2.5cf carbon filter and 80k softener are installed along with commercial 800 gpd Reverse Osmosis. He is serious about growing GC, no more messing around.

http://uploads.tapatalk-cdn.com/20160201/a92edefe2192ac0d1fcaa6cab013b780.jpg

Where do you barbecue now?

Garfield

[stephen]

bump!!

[bdel01]

any prefilter before pump?

[Hiero]

so hes down to just have all these pipes and filters everywhere? LOL