• Amused
  • Angry
  • Annoyed
  • Awesome
  • Bemused
  • Cocky
  • Cool
  • Crazy
  • Crying
  • Depressed
  • Down
  • Drunk
  • Embarrased
  • Enraged
  • Friendly
  • Geeky
  • Godly
  • Happy
  • Hateful
  • Hungry
  • Innocent
  • Meh
  • Piratey
  • Poorly
  • Sad
  • Secret
  • Shy
  • Sneaky
  • Tired
  • Results 1 to 3 of 3

    Thread: DIY Bottom Cleaner and Water Stirrer

    1. #1
      Winscene is offline Member
      This user has no status.
       
      Feeling:
      ----
       
      Join Date
      May 2016
      Location
      Connecticut
      Posts
      35

      DIY Bottom Cleaner and Water Stirrer

      A few years ago I built a 7,000 gallon, 45 mil EPDM-lined, Koi Pond, and did not use any loose rocks or pebbles on the bottom (but did use field stones to build sidewalls, atop a 2 foot cinder block base) because I wanted to make it as self-cleaning as possible.

      I have very good water turnover, Artesian 2 HH, with 3 TPRs doing a slow swirl with returned, filtered water, and a Rhino bottom drain as source water (also have a side-wall, backup water source to leaf pre-filter). My pond stays generally very clean.

      However, I also wanted a way to kick up, or swirl, any small debris off of the pond bottom so that particulate matter would get recirculated and removed via the bead filter. I wanted to stir up the bottom with a water hose, and needed something stiff to put in and move around the pond.

      So I took a leftover 10 foot, one-inch pvc pipe and added a smaller, maybe 2 feet, piece on an angle. I attached a water hose to the end.

      I then did a variation on the theme, and also used the pvc arrangement to hook up a long suction hose, connected to a wet vac, and used it to suck up any small stones or pebbles that may have fallen into the pond. Duct tape connected all of the pieces. (I think I will upgrade this to eliminate duct tape, actually gluing pvc pieces together), and maybe using velcro to hold either the water hose or suction hose.

      Stirring or sucking out particles will make the bottom of my pond immaculate.
      Name:  BLOW DIY JPEG.jpg
Views: 282
Size:  192.6 KBName:  Blow II JPEG.jpg
Views: 277
Size:  143.3 KB

    2. #2
      Ronfire is offline Junior Member
      This user has no status.
       
      Feeling:
      ----
       
      Join Date
      Aug 2017
      Location
      Merritt BC Canada
      Posts
      18
      What about using a central vac hose and wand connected to the suction side of the pump to vacuum the bottom clean?

    3. #3
      RichToyBox's Avatar
      RichToyBox is offline Administrator ~ WWKC BOD ~
      Koi Health Care Committee Member
      This user has no status.
       
      Feeling:
      Awesome
       
      Join Date
      Feb 2005
      Location
      Sandston, VA
      Posts
      13,036
      I used swimming pool hose with https://express.google.com/product/1...FcILDAodtR4FYg attached to my skimmer plumbing to do my vacuuming. Worked great for getting the eggs out of the pond following a spawn, also rocks, sand, and other debris. Just be sure that the swimming pool hose fits the leaf trap, and will fit inside the plumbing. I also used the same system with a series of plumbing fittings to make it fit a sub pump, recycling the water to the pond, instead of sending it to the filters.

      "Our goal is to assist with emergency and Koi health issues, as well as educate on best practices. Please help us gain a clear picture by giving the original poster time to answer our questions before offering opinions and suggested treatments."

      Zone 7 A/B
      Keep your words sweet. You never know when you may have to eat them.
      Richard

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •