Thanks for reading.
My Aqua UV "Classic 40" power supply has failed and most likely will need to be replaced.
I would like to ask someone who has one to measure the voltage across the 4 pins of the output connector that goes to the bulb.
Or maybe you just have that information already in your head! lol
R
ResiMan,
I have the older style Savio, but it was four pin as well. I dont remember the voltage readings, but these are essentially a fluorescent bulb and ballast. You should be able to go to any home supply store and get a ballast that will work.
That is what I did. Two of those pins are used by the electronic start circuit to draw the arc inside bulb. The other two are the constant voltage to maintain it. So voltage reading on two "arc" pins isn't constant. All are AC though.
Sorry I couldnt be of more help.