Already it is equally gentlemen did yesterday floor
Already it is equally gentlemen did yesterday floor
"The cheapest, a possible way of building a suitable pond for koi is to build it only once! .. But you must meet one basic requirement - you have to build it properly!"
Reading backwards. Absolutely amazing and beautiful family.
All I can say is just WOW, WOW, WOW!!!
Today we've added to my frame windows on the underwater world KOI
Stainless steel angles, stainless steel screws 35mm +. The frame is made in the system frame sealed. Is installed only by holding the glass, and the glass itself laminated safety float with two panes of 15mm will be glued to the wall with silicone, glass layer adjacent to the wall will be 11cm but not before the entire frame is exposed to a polyurea SLAM U-210
Ultimately, I want to have the effect of water hanging without top frame
"The cheapest, a possible way of building a suitable pond for koi is to build it only once! .. But you must meet one basic requirement - you have to build it properly!"
Wow.......this makes Stephen's pond look paltry.
KOImark, I have a question: From the pictures, it looks like you might be building two ponds -- one inside and one outside?
Yes exactly build it all at once, a house and two tanks
https://www.koiphen.com/forums/showth...-dream-KOIpond
We came to the conclusion that his wife will be easier to do it right away, as is the construction of heavy equipment. It's hard to invest in two tanks at once, but do it slowly as we have enough funds.
In Poland, the summer is very short, and the winters long and I want to enjoy all year round carp, a winter garden has always been my dream.
"The cheapest, a possible way of building a suitable pond for koi is to build it only once! .. But you must meet one basic requirement - you have to build it properly!"
It has a shelf reinforced with concrete and solid fat bars, it will be the basis for erecting a waterfall.
We'll masonry of lightweight cellular concrete blocks, a waterfall up to the ceiling or wall building will be quite high. We'll make a shelf and steps are laying the flat stones, they will be pots with plants and mosses, epiphytes may also have some moisture-shove.
Behind the wall of the waterfall will be even became Bakki Shower
As already wymurujemy wall is a whole will also be sealed with polyurea and we will sputter along the entire tank.
It was a little mortar so my brother used it to soften the angles in the second tank under a cloud ;-)
"The cheapest, a possible way of building a suitable pond for koi is to build it only once! .. But you must meet one basic requirement - you have to build it properly!"
Cant wait to see this done. You're going to have your own little indoor rainforest fish paradise !
Let us know when the party is ! I'll bring the Staropramen and guacamole !
Currency units are a media of exchange and not a store of wealth
I love watching the progress on this built. In 2 months it will already be a lot colder in Poland.
That window will be a gem of a feature!!
Doug - out
See Our Pond https://www.koiphen.com/forums/showth...ond&highlight=
Blank Check Project - Helping those who stand on that wall. www.blankcheckproject.com
bricklaying artistic ;-)
The design of the waterfall made, even plaster, paste tubes, polyurea, and then you can play in mother nature and paste stones and make a small brook
"The cheapest, a possible way of building a suitable pond for koi is to build it only once! .. But you must meet one basic requirement - you have to build it properly!"
Pouring of water is far from me , but came something that will separate my koi from the winter and give them eternal summer
Although it is not about a bit, but it's part of my whole project full-year koipond
Large sliding window to the output of the summer to a larger koipond
the entrance door of the other side of the room filtration and side windows
do not open the window fix
"The cheapest, a possible way of building a suitable pond for koi is to build it only once! .. But you must meet one basic requirement - you have to build it properly!"
So excited to see the finished product, keep it coming!
This is so exciting! I can't wait to see it finished! What did you use to cut the blocks tat way?
Love watching this pond come together!
Doug - out
See Our Pond https://www.koiphen.com/forums/showth...ond&highlight=
Blank Check Project - Helping those who stand on that wall. www.blankcheckproject.com
Yesterday was admittedly not polyurea spray but also the substance of cool
Will visit us Gentlemen of BestPoint, very cool people and a lot of experience, applying foam Demilec the attic and of course the roof of my aquarium to berths were warm in winter
below video of foam application
"The cheapest, a possible way of building a suitable pond for koi is to build it only once! .. But you must meet one basic requirement - you have to build it properly!"
Looking good and will certainly will prevent the room to cooldown quickly.